another one about e46 projectors
04-19-2009, 08:01 AM
#1
another one about e46 projectors
there's 3 wires (red, green, black) coming from the projector solenoid to a small controller board which has only 2 wire connector (pwr, grnd) on the other end.
can that middle controller be bypassed by simply running a butt connector between the red and green wire (solenoid side) and power wire (light harness side) and then black2black or...do i need that little controller for some (what?) reason.
i'd try and do it but don't want to fry the solenoid in case it's not recommended.
can that middle controller be bypassed by simply running a butt connector between the red and green wire (solenoid side) and power wire (light harness side) and then black2black or...do i need that little controller for some (what?) reason.
i'd try and do it but don't want to fry the solenoid in case it's not recommended.
Thread
Thread Starter
Forum
Replies
Last Post
umnitza
Group Deals / Sponsors Forum
0
09-01-2015 01:03 PM