Typical Manifold Vacuum Pressure
03-09-2009, 04:31 PM
#1
Member
Thread Starter
Join Date: Jan 2009
Location: Thomasville, GA
Posts: 270
Typical Manifold Vacuum Pressure
This might be another good thread to start.
Whats your intake manifolds vacuum pressure?
Just tested mine, and it is 22" Hg. at idle(700 rpms) (possibly 20 because the gauge isn't zero'd)
Engine has 112k miles on it (95 Max).
Whats your intake manifolds vacuum pressure?
Just tested mine, and it is 22" Hg. at idle(700 rpms) (possibly 20 because the gauge isn't zero'd)
Engine has 112k miles on it (95 Max).
Last edited by Rob_0126; 03-09-2009 at 04:50 PM.
03-09-2009, 05:53 PM
#4
Member
Thread Starter
Join Date: Jan 2009
Location: Thomasville, GA
Posts: 270
thanks 
Here's a nice little chart I ask'd up: http://www.therangerstation.com/Maga...acuumLeaks.htm
And another http://imperialclub.com/Repair/Fuel/...auge/index.htm
And another: http://www.gregsengine.com/vacuum.htm
Might as well make this thread appealing and useful even moreso.
Here's a nice little chart I ask'd up: http://www.therangerstation.com/Maga...acuumLeaks.htm
And another http://imperialclub.com/Repair/Fuel/...auge/index.htm
And another: http://www.gregsengine.com/vacuum.htm
Might as well make this thread appealing and useful even moreso.
Last edited by Rob_0126; 03-09-2009 at 06:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
09-29-2015 02:02 PM