R34 HID Conversion

[Flava_24/7]

Originally Posted by foreknowapparelworldwide

Before I go ahead and choose to get R34's or leave it as stock.
Does any one know:

Are R34's better using stock light bulbs than the STOCK 95 max OEM's using stock bulbs?

Would stock R34's be better with HID than 95 max OEM's? This is without projectors. (If I choose to go head and buy HID later on for the lows if I use R34, and I decide it looks like crap beam wise, Ill deal with retrofitting pkjtrs then. Whatever)

Jeez, stop posting and READ. This very same topic has been covered over and over in regards to the R34's. Why is it so difficult for you to do some searching??

[The Wizard]

Originally Posted by Flava_24/7

Jeez, stop posting and READ. This very same topic has been covered over and over in regards to the R34's. Why is it so difficult for you to do some searching??

Maybe if people would post their opinions, on the exact questions I ask, and why I ask is because they are not answered in the topics anywhere to my satisfaction. So therefore I'm going to post, to get opinions, facts,thoughts replies on my questions as thats what a forum is for, and I posted that on two threads because they both have different viewers, because they are different subjects basically, while similar. If you don't come to a board to read and respond to the content of a post then why are you here anyways. If some of you would spend the time you spent writing a *****ing reply to post answers, I wouldn't have to ask certain questions anymore or redundantly. If people can take the time to make replies with content such as yours Flava. It's easier to just post if you have a reply that is input, or related to the previous posts content. Or, if not, don't say anything. Filling up the board with even more crap?


Now as this is on a third page because of your post I shall simply, copy and paste what I was looking for some input on. Thanks.

Just keep the *****ing to a minimum. It really won't do any good.
You don't have to read my posts if you don't want to. And you Don't have to respond either.

What was being asked, if anyone has some actual thoughts on it and not my posting habits I thank you in advance.


Are R34's better using stock light bulbs than the STOCK 95 max OEM's using stock bulbs?

Would stock R34's be better with HID than 95 max OEM's? This is without projectors. (If I choose to go head and buy HID later on for the lows if I use R34, and I decide it looks like crap beam wise, Ill deal with retrofitting pkjtrs then. Whatever)

[HomerMAC]

^^^^ NO... the OEM foggy looking headlgihts are better for HID than the R34^^^^
reason being the r34 uses the reflector to direct the light... the regular Bulbs in teh r34s look bad according to people.... the 95 headlights use angled cuts in the plastic/glass to aim teh light and the reflector is use to collect the light....


the best headlights to do the retro are the GLASS ones.. the aftermarket non glass ones start to fade.. and the glass starts getting that faded fogged look.. no matter how much you take care of them... Im gonna do a glass Retro eventually.. thats my final project... for now.. STARTER>Engine MOUNT> Rack Pinion > wheel bearing/pads/rotors/4piston caliper> Wheels (put tires on them 17"x9") > paint bumper> headlight in glass

[G4nismo]

Originally Posted by foreknowapparelworldwide

Maybe if people would post their opinions, on the exact questions I ask, and why I ask is because they are not answered in the topics anywhere to my satisfaction. So therefore I'm going to post, to get opinions, facts,thoughts replies on my questions as thats what a forum is for, and I posted that on two threads because they both have different viewers, because they are different subjects basically, while similar. If you don't come to a board to read and respond to the content of a post then why are you here anyways. If some of you would spend the time you spent writing a *****ing reply to post answers, I wouldn't have to ask certain questions anymore or redundantly. If people can take the time to make replies with content such as yours Flava. It's easier to just post if you have a reply that is input, or related to the previous posts content. Or, if not, don't say anything. Filling up the board with even more crap?


Now as this is on a third page because of your post I shall simply, copy and paste what I was looking for some input on. Thanks.

Just keep the *****ing to a minimum. It really won't do any good.
You don't have to read my posts if you don't want to. And you Don't have to respond either.

What was being asked, if anyone has some actual thoughts on it and not my posting habits I thank you in advance.


Are R34's better using stock light bulbs than the STOCK 95 max OEM's using stock bulbs?

Would stock R34's be better with HID than 95 max OEM's? This is without projectors. (If I choose to go head and buy HID later on for the lows if I use R34, and I decide it looks like crap beam wise, Ill deal with retrofitting pkjtrs then. Whatever)

omg some people never learn...
maybe no one likes responding to your questions b/c there so redundant.
rather why don't you stop being lazy and actually search for your answers. this has been covered many times in many other threads.

just b/c its a forum doesn't mean you can post the same banal questions over and over and expect people to be ok with that.

[Flava_24/7]

Originally Posted by foreknowapparelworldwide

Maybe if people would post their opinions, on the exact questions I ask, and why I ask is because they are not answered in the topics anywhere to my satisfaction. So therefore I'm going to post, to get opinions, facts,thoughts replies on my questions as thats what a forum is for, and I posted that on two threads because they both have different viewers, because they are different subjects basically, while similar. If you don't come to a board to read and respond to the content of a post then why are you here anyways. If some of you would spend the time you spent writing a *****ing reply to post answers, I wouldn't have to ask certain questions anymore or redundantly. If people can take the time to make replies with content such as yours Flava. It's easier to just post if you have a reply that is input, or related to the previous posts content. Or, if not, don't say anything. Filling up the board with even more crap?


Now as this is on a third page because of your post I shall simply, copy and paste what I was looking for some input on. Thanks.

Just keep the *****ing to a minimum. It really won't do any good.
You don't have to read my posts if you don't want to. And you Don't have to respond either.

What was being asked, if anyone has some actual thoughts on it and not my posting habits I thank you in advance.


Are R34's better using stock light bulbs than the STOCK 95 max OEM's using stock bulbs?

Would stock R34's be better with HID than 95 max OEM's? This is without projectors. (If I choose to go head and buy HID later on for the lows if I use R34, and I decide it looks like crap beam wise, Ill deal with retrofitting pkjtrs then. Whatever)

WTH dude, you havent bothered to look is the problem. PEOPLE have posted there opinions and etc. you just havent searched. Even in the two threads that you have been asking questions over and over again, you got the same information. You just dont either seem to understand anything anyone is telling you or just dont want to.
Simple searchimng brought up these threads all pertaining to R34's..
Maxima R34 Type Dual Reflector Headlights INSTALLED
Are the R34 headlights any good?
Should I get these headlights?
Are these headlights worth $200?

EVERYONE says the same thing in all those threads, output sux.
Now if I can find these threads, you can too. If you dont know anything about doing a retro, read up on that as well. Like we tell everyone else.. go to http://www.hidplanet.com/forums/ and READ!!!!!!

[max95q]

Originally Posted by foreknowapparelworldwide

Maybe if people would post their opinions, on the exact questions I ask, and why I ask is because they are not answered in the topics anywhere to my satisfaction. So therefore I'm going to post, to get opinions, facts,thoughts replies on my questions as thats what a forum is for, and I posted that on two threads because they both have different viewers, because they are different subjects basically, while similar. If you don't come to a board to read and respond to the content of a post then why are you here anyways. If some of you would spend the time you spent writing a *****ing reply to post answers, I wouldn't have to ask certain questions anymore or redundantly. If people can take the time to make replies with content such as yours Flava. It's easier to just post if you have a reply that is input, or related to the previous posts content. Or, if not, don't say anything. Filling up the board with even more crap?


Now as this is on a third page because of your post I shall simply, copy and paste what I was looking for some input on. Thanks.

Just keep the *****ing to a minimum. It really won't do any good.
You don't have to read my posts if you don't want to. And you Don't have to respond either.

What was being asked, if anyone has some actual thoughts on it and not my posting habits I thank you in advance.


Are R34's better using stock light bulbs than the STOCK 95 max OEM's using stock bulbs?

Would stock R34's be better with HID than 95 max OEM's? This is without projectors. (If I choose to go head and buy HID later on for the lows if I use R34, and I decide it looks like crap beam wise, Ill deal with retrofitting pkjtrs then. Whatever)

So, you're pissed at us because our previous posts before you came to the site or while you were here aren't what you want to hear?

GTFO!!

I come to this site to post amongst grown ups buddy. If you dont like whats in here then save your *****ing and go somewhere else.

You've already been advised the search option so go and marinate on that for a minute.

Sweet.

Thanks for those links.
I ACTUALLY did not find the first one in my Searches, perhaps using the wrong terms.

[Flava_24/7]

Originally Posted by foreknowapparelworldwide

Sweet.

Thanks for those links.
I ACTUALLY did not find the first one in my Searches, perhaps using the wrong terms.

Really? I typed in R34 output. Doesnt get any simpler then that.

[G4nismo]

omg wow

[kzoosho]

Originally Posted by G4nismo

omg wow

[travis10302]

i want HID's but i dont understand how you retro fit projectors in the r34 housings

[Flava_24/7]

Originally Posted by travis10302

i want HID's but i dont understand how you retro fit projectors in the r34 housings

Here we go again......

[gtr_rider]

lol, this thread is funny

[kzoosho]

Originally Posted by Flava_24/7

Here we go again......

He has pmed me man. I think HE understands lol

[MorpheusZero]

Originally Posted by gtr_rider

lol, this thread is funny

Those look cool.

I'm starting to look at R34s... maybe TSXs or S2000s in the outers and FXs in the inners... or then again for that money I could get a motorcycle...

[G4nismo]

how come all the lamest threads end up being the most popular and cluttered???

[inthebackofthemax]

i have the same r34 style headlights the bulbs in the headlight are 9006 low beam 9005 hi beam the headlights has a new harness to go to the factory 9004-9007 harness. i have HID's in my r34 headlights just order the 9006 kit an you will have no problem, an the only problem you will have is that when you put on the hi beam low beam turns off there not on together but once you have HID's you wouldnt have to use hi beam. HID's take over.

[DrunkieTheBear]

Originally Posted by inthebackofthemax

i have the same r34 style headlights the bulbs in the headlight are 9006 low beam 9005 hi beam the headlights has a new harness to go to the factory 9004-9007 harness. i have HID's in my r34 headlights just order the 9006 kit an you will have no problem, an the only problem you will have is that when you put on the hi beam low beam turns off there not on together but once you have HID's you wouldnt have to use hi beam. HID's take over.

WOW, the horrid engrish in this statement is enough to boggle the mind.

and you obviously have no clue what you are talking about, just saying that you don't need hi-beams cause the HID's are the best is not true in this case. I've seen the output of these headlights with HID's and its horrible, the light doesn't even project out in front of you.

[tigersharkdude]

WTF, thread jack.

SPAM

GTFO