FishyMan

I am wanting to do some custom ground wires. I have done a free search but didn't come up with anything.

I am basically using 4 GAUGE wires. I would like to know how to ground, or wire it. Can I just replace the stock points, if so where?

Any input appreciated.

renagade281

i always use the bolts that hold my seats to the car (front seats) because i know thats one of the best grounds in the car

99grnmaxgxe

iTrader: (11)

http://www.activetuning.com/products...stallation.php

He wants engine grounds, not one for an amp.

joepino

just use the stock grounds. they worked fine from the factory. using better wire helps out with your electronics and sensors so your car runs better

Max Noob

iTrader: (5)

main engine ground front of the engine block near the radiator onthe battery side.

main chassic ground is next to battery between the battry cage and the air box.

GTRMaX

You can use the factory grounds they work well just make sure you sand off any rust or if your going to use custom ground points make sure you sand off the paint down to the bare metal.