vipervadim

iTrader: (10)

Hello all

i need some help! my maxima has been acting very strange lately.

I had the 0201 code (multiple cylinder misfire) days ago but that was probably because my pcv valve was badly clamped down after i took off the Intake Manifold to clean it. then i fixed the pcv valve connection, reset the ecu and it was fine, for a week

yesterday i start up the car drive for 3 minutes and i stop at a red light, all of a sudden my rpms drop below 600 my car starts to idle real rough close to stalling, and my TCS (traction control system) and SLIP light next to it, light on and start to intensify more and then less alternatively (always staying on). My max is an automatic can it be my transmission??

i've checked the intake manifold connections three times making sure i connected everything properly, i checked all the fuses too. and i don't understand where this is coming from. could it be a bad injector (i have a 99 with new ignition coils)

i reset the ecu again and it cleared, but then i started the car up and it came on again (TCS and SKIP too) giving me a 0604 and 0201 CEL (cylinder 5 misfire and multiple misfires)

has anybody ever had the TCS and SLIP light constantly on?

thank you any help would be greatly appreciated