Go Back   Maxima Forums > Maxima Discussions > 4th Generation Maxima (1995-1999)
Sign in using an external account
Register Forgot Password?
Register Photos FAQ Timeslips Members Parts Guide Search Today's Posts Mark Forums Read ExperienceVendorsUsed CarsGarage TSB & Recalls
Search

4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Welcome to Maxima.org!
Welcome to Maxima.org,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!


Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old 07-26-2003, 01:45 PM   #1
Supporting Maxima.org Member

 
Join Date: Apr 2001
iTrader: (2)
Posts: 682
Points: 11,002, Level: 69
Points: 11,002, Level: 69 Points: 11,002, Level: 69 Points: 11,002, Level: 69
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%

Send a message via AIM to NISMOPower
Power Steering Pump Removal?

I've gotten the belts off, and taken out the bolt on the back side of the PS pump. I don't know what to do next. Do i need to drain anything or what not? Hoses to remove???

Chris
__________________
1997 GLE - Newer Motor - 5Spd - VLSD Tranny - 5th Gen. Clutch - Fidanza Flywheel - Redline MT-90 - Custom Intake
300ZXTT Muffler - SSR 19" Comp-C - Cattman Gen 2 Coilovers - Progress RSB - FSTB
NISMOPower is offline   Reply With Quote
Old 07-27-2003, 01:04 PM   #2
Supporting Maxima.org Member

 
Join Date: Apr 2001
iTrader: (2)
Posts: 682
Points: 11,002, Level: 69
Points: 11,002, Level: 69 Points: 11,002, Level: 69 Points: 11,002, Level: 69
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%

Send a message via AIM to NISMOPower
Anyone?
__________________
1997 GLE - Newer Motor - 5Spd - VLSD Tranny - 5th Gen. Clutch - Fidanza Flywheel - Redline MT-90 - Custom Intake
300ZXTT Muffler - SSR 19" Comp-C - Cattman Gen 2 Coilovers - Progress RSB - FSTB
NISMOPower is offline   Reply With Quote
Old 07-27-2003, 01:52 PM   #3
Supporting Maxima.org Member

 
Join Date: Jan 2002
Location: San Diego, CA
iTrader: (6)
Posts: 868
Points: 9,415, Level: 65
Points: 9,415, Level: 65 Points: 9,415, Level: 65 Points: 9,415, Level: 65
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%

Send a message via AIM to TonyGotSkilz
Just did this after an engine swap..I'm assuming by drive belts you mean the one attached to the pump if not, you have to turn that screw to losen the belt tension. Then you have to take the bolt out of the front of that little block (its a little bolt thats a ***** to get to, after you take that out you need to remove the one long bolt that holds the pump on (i think you did that already) then you shake it back and forth and up and down and it'll slide out, getting everything back on is a complete and total *****... Why did you have to change the pump out, i'm just curious cause i did because i stripped the hole that the banjo bolt goes in and i was pouring power steering fluid everywhere....
__________________
In the market for a newer maxima or a cherry red (cherry condition) Anniversary edition.
TonyGotSkilz is offline   Reply With Quote
Old 07-27-2003, 03:33 PM   #4
Supporting Maxima.org Member

 
Join Date: Apr 2001
iTrader: (2)
Posts: 682
Points: 11,002, Level: 69
Points: 11,002, Level: 69 Points: 11,002, Level: 69 Points: 11,002, Level: 69
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%

Send a message via AIM to NISMOPower
I got the long bolt out but what bolt are you talking about in front of the block?

Chris
__________________
1997 GLE - Newer Motor - 5Spd - VLSD Tranny - 5th Gen. Clutch - Fidanza Flywheel - Redline MT-90 - Custom Intake
300ZXTT Muffler - SSR 19" Comp-C - Cattman Gen 2 Coilovers - Progress RSB - FSTB
NISMOPower is offline   Reply With Quote
Old 07-27-2003, 03:37 PM   #5
Supporting Maxima.org Member

 
Join Date: Jan 2002
Location: San Diego, CA
iTrader: (6)
Posts: 868
Points: 9,415, Level: 65
Points: 9,415, Level: 65 Points: 9,415, Level: 65 Points: 9,415, Level: 65
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%

Send a message via AIM to TonyGotSkilz
Theres a tensioner its a long bolt that goes into a block thats about 3/4 of an inch wide (its a rectangle). If you got the belt off you've already loosened it (unless you cut the belt) now theres a bolt that goes up and down (thats the tensioner) and one that goes into the same little block right to left...its the bolt you see if your looking down at the wheel on the pump, thats right to the immediate left of the wheel. You have to remove that one, once its out you just move the pump up and down till it slides out.
__________________
In the market for a newer maxima or a cherry red (cherry condition) Anniversary edition.
TonyGotSkilz is offline   Reply With Quote
Old 07-27-2003, 03:37 PM
MaximaOrg
Nissan Maxima




Paid Advertisement
 
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


 




All times are GMT -7. The time now is 06:35 AM.


Maxima.org Forums Home Here you can view your subscribed threads, work with private messages and edit your profile and preferences Frequently Asked Questions on the Forums Search Find other members Registration is free! Support Maxima.org! Receive perks and benefits by donating to Maxima.org Questions? Comments?  Suggestions? Contact Us! Visit our Sponsors View and submit Maxima events Log Out of Maxima.org
Emails Backup

Search Engine Optimization by vBSEO 3.5.2