FS: Z32 Aluminum 4 Piston Calipers and Z32 specific Teflon/SS Braided Brakelines
#1
2060lbs and falling...
Thread Starter
iTrader: (10)
Join Date: Jan 2003
Location: Madison, WI
Posts: 5,160
FS: Z32 Aluminum 4 Piston Calipers and Z32 specific Teflon/SS Braided Brakelines
All of the following parts were on my S13 for about three years. Most of that time was spent on jackstands. About 10 hours of street driving on these parts. No trackdays.
SOLD! I had these Z32 Aluminum 4 Pistons. Cleaned them up real nice and painted with Rustoleum enamel primer, gloss black then, clear coat gloss. Despite many claims of contrary the enamel holds up great to a glowing hot rotor. Askin $150 shipped for the calipers.
I can muster some better pics if required.
This is a pic of the rear only because I don't have a freestanding pic of the front. Note: THIS IS ONLY TO SEE HOW THE PAINT LOOKED! Not the actual caliper for sale. This is a Z32 Two piston rear caliper.
Technafit Z32 specific Teflon/SS Braided Brakelines. These are not your typical banjo type fitting lines. They are an AN fitting on one and and the standard double flair 10mm on the other. This shot is of the rears but I can get pics of the fronts which are much longer of course.
Russell Speed bleeders. $15 shipped and they're on the way.
SOLD! I had these Z32 Aluminum 4 Pistons. Cleaned them up real nice and painted with Rustoleum enamel primer, gloss black then, clear coat gloss. Despite many claims of contrary the enamel holds up great to a glowing hot rotor. Askin $150 shipped for the calipers.
I can muster some better pics if required.
This is a pic of the rear only because I don't have a freestanding pic of the front. Note: THIS IS ONLY TO SEE HOW THE PAINT LOOKED! Not the actual caliper for sale. This is a Z32 Two piston rear caliper.
Technafit Z32 specific Teflon/SS Braided Brakelines. These are not your typical banjo type fitting lines. They are an AN fitting on one and and the standard double flair 10mm on the other. This shot is of the rears but I can get pics of the fronts which are much longer of course.
Russell Speed bleeders. $15 shipped and they're on the way.
Last edited by Broaner; 01-27-2010 at 08:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
imported_Nismo_max
4th Generation Maxima (1995-1999)
2
09-21-2015 07:24 PM