FS/GI: Stillen V2 supercharger kit

*fellfrosch7* · 02-29-2008, 12:41 PM

I got this not too long ago but I don't think I'll go through with the install. Here's the parts list of what I have, as complete as I could make it.

Vortech V2 supercharger (2 pullies, 3.33" and 3.6", both 6-rib)
Mounting plate with reinforced welds
Vortech BOV
Several pieces of intake pipes, couplers, clamps, and K&N air filter
Idler pulleys and other spare pulleys (?)
Stillen/Vortech FMU, an extra upgraded BEGI FMU, and mounting hardware
Oil drainback plate and SS braided oil feed line
Inline fuel pump and wiring
Alternator relocate bracket
A few 6-rib belts
Stillen CARB sticker and an extra CARB plate
Installation instructions
Misc. fuel lines and vaccuum hoses
Misc. hardware/bolts

All pictures are here: http://www.rafalr.com/forsale/stillen/

This is not off my own car, I bought it from someone who took it off their car. There are some upgraded parts in this kit, but some little things might be missing. One thing I know you'll need is the charge pipe (from supercharger to throttle body), but that can be made by any exhaust shop. I'm not 100% sure what all the little parts are, so your best bet is to take a look at the pictures. Everything shown in the pics will be included.

Looking to get $1800 shipped for it. If you're serious about getting it, PM me and maybe we can do a deposit type of deal. I've got good trader feedback on here, both from buying and selling, and I'm PayPal verified. If you're near Vegas, maybe we can meet somewhere to deliver.

EDIT: SOLD!!!

black_maxed95 · 02-29-2008, 01:18 PM

what is the price gonna be about for the kit?
does it come with tubing?

*fellfrosch7* · 02-29-2008, 02:07 PM

I looked around and from the prices I've seen in the past, I'll start at 1900 shipped OBO. I should be able to get pictures and a list of parts hopefully tomorrow.

*dutch078* · 02-29-2008, 03:57 PM

pm sent

shortyblu95 · 02-29-2008, 05:06 PM

wow would have been nice to see this monday, would have been sold already but i put my money elsewhere to stay NA

*fellfrosch7* · 02-29-2008, 05:31 PM

Things come and go, sell of your other NA mods if you really want the S/C

2kprlmax · 02-29-2008, 07:53 PM

any pics

*fellfrosch7* · 02-29-2008, 08:02 PM

I'll get the pics taken tomorrow during the day.

*fellfrosch7* · 03-01-2008, 07:02 PM

Updated original post with pics.

Scooobay · 03-01-2008, 07:11 PM

Is that matty's V1 plate or the V2 plate.

*fellfrosch7* · 03-01-2008, 07:59 PM

I thought the V1 plates were steel, and the V2's are aluminum? I assumed it was the V2 but if there's a way to tell, then let me know.

shortyblu95 · 03-01-2008, 10:28 PM

a magnet wont stick to aluminum but will to steel unless its coated, try it out. Otherwise an actual v1 blower is MUCH louder(sense its not installed you wnt know) and has a differnt part #

*fellfrosch7* · 03-01-2008, 11:15 PM

I thought it was implied from my previous post that this one is aluminum. The previous owner has a part of it reinforced with some extra welds to try to minimize flexing, you can see that in the pics.

mywhitewolf · 03-02-2008, 07:47 AM

if you can do $1900 and ship it to Australia, consider it sold?

98MaXeDouT · 03-02-2008, 09:08 AM

willing to sell the extra begi FMU??

*fellfrosch7* · 03-02-2008, 10:49 AM

All PMs replied to.

It seems there are 4-5 interested people, so... money talks. Whoever can pay the whole amount in full gets it. PM me and I'll give you my PayPal info or however else you want to handle the payment.

Scooobay · 03-02-2008, 12:58 PM

Quote:

Originally Posted by fellfrosch7

All PMs replied to.

It seems there are 4-5 interested people, so... money talks. Whoever can pay the whole amount in full gets it. PM me and I'll give you my PayPal info or however else you want to handle the payment.

I still want to know if it's a V2 plate or V1 ..

*fellfrosch7* · 03-02-2008, 02:45 PM

Dude the thread is labeled V2 kit and I said the plate is aluminum, it's a V2 blower and plate.

Blackwind · 03-02-2008, 04:36 PM

Quote:

Originally Posted by fellfrosch7

Dude the thread is labeled V2 kit and I said the plate is aluminum, it's a V2 blower and plate.

where you at in vegas. i just moved to henderson.

Scooobay · 03-02-2008, 06:20 PM

what trim blower?

*fellfrosch7* · 03-02-2008, 09:45 PM

Scooobay - I don't mean to be a dick but do your own homework. Have you ever seen anybody selling one of these kits with anything other than the S-trim?

Blackwind, PM'ed you...

*fellfrosch7* · 03-03-2008, 11:23 AM

The first interested buyer decided to pass, so this is still available. Price is negotiable too.

*fellfrosch7* · 03-03-2008, 10:08 PM

Bump, price dropped to $1800 shipped OBO.

Blackwind · 03-03-2008, 10:42 PM

you get my pm

*fellfrosch7* · 03-04-2008, 12:51 PM

PMed you back... and the kit is now sold.