flywheel with timing ring $100 (Will need to be resurfaced)
shifter $40
shifter bushing$20 ( Rubber is cracked so only good to fill)
shift rod $50
control rod $50
brake pedal $40
master cylinder $30
slave cylinder $15
misc bolts just ask
__________________
If you need a 4th gen part contact me:
I do not ship large parts such as
engines, transmissions, seats, hoods, fenders, bumpers, doors or trunk lids due to the hassle.
Last edited by Maxima_Joe; 03-12-2008 at 12:21 PM.
I don't mind.
I have one as well but there not worth selling when you can get a full ss line for $40.
Not to mention the hassle of getting them out in one piece or try to reinstall one.
__________________
If you need a 4th gen part contact me:
I do not ship large parts such as
engines, transmissions, seats, hoods, fenders, bumpers, doors or trunk lids due to the hassle.
__________________
If you need a 4th gen part contact me:
I do not ship large parts such as
engines, transmissions, seats, hoods, fenders, bumpers, doors or trunk lids due to the hassle.
__________________
If you need a 4th gen part contact me:
I do not ship large parts such as
engines, transmissions, seats, hoods, fenders, bumpers, doors or trunk lids due to the hassle.
ok put that clutch aside for me i have to get money in the bank so i can paypal you tomorrow. you have the pp bolts too?
__________________
98 SE Black on Black. 5spd swap,budget Ypipe,MEVI,CAI,Clear corners,H&R/Kyb gr2, Flowmaster,FSTB,X-drilled/slotted front and rear,2k2 SE wheels,Stillen Lip,Ionics sides,Fog light rewire,corner light mod,SS Clutchline,15% tint all around 02 Pathfinder 6disc in dash,2k2 max center console.-Production date 09-97 My daily driver.
98 SE Black on Black Auto w/ABS. 2k2 se wheels,Clear Corners,Corner light mod,Rewired foglights,FSTB.-Production date 12-97 Wifes daily driver.
Linear Mode
