MEVI Kit $350 shipped
08-03-2007, 04:25 PM
#1
MEVI Kit $325 shipped
EDIT: Added Pictures and lowered price and waived the paypal fee.
Hey guys, I'm selling my MEVI kit. It has everything needed minus a RPM switch which you could pick up for less than $50. I'm moving away from performance right now for more creature comforts, so I don't need it anymore.
The MEVI, unlike the 00vi, is a fairly simple bolt on item. It changes the top end characteristics of the car dramatically. Where the USIM falls short, the MEVI continues to pull all the way to redline with power. The MEVI has a flawless cover which some kits don't include. Everything is in tip top condition. I began polishing the top plate cover on the MEVI, and it's basically set. Right now it has a brushed alluminum look, but all that is needed is to just sand it with 1200 and then 1600 grit sand paper then polish it to a beautiful shine. I was a bit over zealous and was going to polish the whole thing, so there's some spots on the front that are rough sanded, but all of that is completely hidden by the cover anyway.
I'm asking $325 shipped or best reasonable offer anywhere in the lower 48 to completely change the attitude of your car.
All other locations will be $300 plus actual shipping.
PICS:
Link to all Pictures: http://s167.photobucket.com/albums/u...SE/For%20Sale/
Please PM me if you are interested.
Thanks,
George
Hey guys, I'm selling my MEVI kit. It has everything needed minus a RPM switch which you could pick up for less than $50. I'm moving away from performance right now for more creature comforts, so I don't need it anymore.
The MEVI, unlike the 00vi, is a fairly simple bolt on item. It changes the top end characteristics of the car dramatically. Where the USIM falls short, the MEVI continues to pull all the way to redline with power. The MEVI has a flawless cover which some kits don't include. Everything is in tip top condition. I began polishing the top plate cover on the MEVI, and it's basically set. Right now it has a brushed alluminum look, but all that is needed is to just sand it with 1200 and then 1600 grit sand paper then polish it to a beautiful shine. I was a bit over zealous and was going to polish the whole thing, so there's some spots on the front that are rough sanded, but all of that is completely hidden by the cover anyway.
I'm asking $325 shipped or best reasonable offer anywhere in the lower 48 to completely change the attitude of your car.
All other locations will be $300 plus actual shipping.
PICS:
Link to all Pictures: http://s167.photobucket.com/albums/u...SE/For%20Sale/
Please PM me if you are interested.
Thanks,
George
08-03-2007, 08:21 PM
#3
I don't see why not, but I would be wary of taking it to a dealer to do it since they'll charge out the *** for the labor and new stuff that you'll likely not need. Beyond that, they probably won't know what the hell it is. The install is fairly easy. The only difficult part of the entire install is the rear support stud bolt removal and removing the coolant line on the passenger side of the EGR. If you're atleast somewhat mechanically inclined you should be able to do this in a couple hours following one of the available online write-ups.
08-13-2007, 06:38 PM
#12
Guest
Posts: n/a
Pics to csmith00@rogers.com and how much to ship to Cambridge ontario Canada? Very interested.
post #1
Thread
Thread Starter
Forum
Replies
Last Post
maxprivate
4th Generation Classifieds (1995-1999)
14
11-29-2017 08:52 AM
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
11-25-2015 08:19 AM
Maxima_Joe
4th Generation Classifieds (1995-1999)
0
08-27-2015 12:01 AM