Maxima Forums - View Single Post

*Orgullo* · 07-29-2007, 10:49 AM

^^^^^^^

When taking out the Maf from the Maf housing from your 02 you'll see the little wire sensor.

Just know that it is not wedged in so your not going to just pull it out.

You have to take some small wire clippers and cut the PLASTIC that is holding it in place. Cut it directly in the center though making sure not to cut one of the sides off. Cut it down until you get to the wire. Once that part is cut then you can pull it out. You will have to do the same thing with the 01 Maf. After you transfer the wire over you just wedge it in place and push the sides back together.

Really easy mod, so long as you take your time.

07-29-2007, 10:49 AM	#89
Orgullo $$ Ballin on a Budget $$ Join Date: Mar 2006 Location: North FL. iTrader: (44) Posts: 2,150	^^^^^^^ When taking out the Maf from the Maf housing from your 02 you'll see the little wire sensor. Just know that it is not wedged in so your not going to just pull it out. You have to take some small wire clippers and cut the PLASTIC that is holding it in place. Cut it directly in the center though making sure not to cut one of the sides off. Cut it down until you get to the wire. Once that part is cut then you can pull it out. You will have to do the same thing with the 01 Maf. After you transfer the wire over you just wedge it in place and push the sides back together. Really easy mod, so long as you take your time.