|
its not hard at all. Took me about 5 minutes. There are 4 or 5 bolts that need to be undone and then the bottom piece will come out. When i tried to unbolt mine the bolts were rusted right on there so 2 turns of the rachet snapped the nut and bolt clean apart Good for me. The only one i had a problem with was the one rearest on the shield. Couldnt get a socket on it so twisted and bent it till it snapped off. I think they are 10mm bolts. if they dont fit try a 3/8 in socket. Best of luck and im sure thats your problem. Let me know. Sounds so nice now on start up and takeoff. No rattle whatso ever and you never know what your gonna find under your car. The plastic pans under the front end, i found a wire cutter i was looking for and a mysterious bumping sound id finally gone.
|