|
Once we had the car strapped to the dyno, I told him about the vias, 1800, 3600 blah blah, then asked him if the timing could be advanced. We did a partial run in 4th gear to make sure everything was working. Then at idle he advanced the timing 5* and the rpm's changed drastically, then he retarded back to "stock" then retarded another 5*. The rpm's changed everytime.
I have the EB software on my laptop but do not know how to use it at this point in time. Is there a way I can use my laptop to check out the settings he used? I don't think he added too much timing, he was aiming for a safe 12.2 AFR so he didn't have to play around too much.
|