Quote:
|
Originally Posted by Michael
Its very easy to take the wires out and swap them. Just take the orange locking piece off and remove the pins and swap them around. Thats what I did when I did the swap and it makes it much easier and you dont have to worry about your wires where you cut and reattached.
and also you can still use the 9004 bulb after cutting the nibs out of the housings (you really cant screw up putting the 9004 back in even with the other nibs cut since its pretty much common sense) so no need to really cut the bulb. This is easier because you dont have to cut new bulbs when you blow the old ones.
|
Nice addition to the thread Michael. I may actually do this if I don't have to cut the harness.