Quote:
|
Originally Posted by speed racer
Use the "U" shape coolant hose from the rear of the 4th gen IM to loop (by Pass) the coolant line going into your TB.
|
I would get another 4' hose to run straight instead of using a tee, dont want any coolant leaking later on.
Quote:
|
Originally Posted by speed racer
You only need the 5th gen EGR guide Tube. When you bolt it on the VQ30DE don't tighten the bolts right away. Make sure the guide tube is plumb. That means you might need to bang it side to side to ensure it sits properly with the UIM. Once you know it fits right than go ahead and tighten the bolts.
|
Im going to elaborate by saying, make sure the EGR guide tube is completely bolted in and ready to have the manifold installed. Once you are ready to install the manifold do a quick eye measurement and take a long screw driver and sorta bend the tube in the angle you need it to be. I still dont see why this needs to be done, but the manifold will not sit perfectly on the tube without some adjustment.
Quote:
|
Originally Posted by Ceasars Chariot
yes got all the extras, fittings, iacv adapter plate its all right here. on the VIAS check, can we do any sort of check to see if its still working with it out of the engine bay ? if so what to do ?
again not sure how much i can get done tommorrow packing all this stuff up and going over to his shop. any links to oovi swap installations - procedures ?
|
Here you can check on how to fix the VIAS,
http://www.cardomain.com/ride/763858/5