Quote:
|
Originally Posted by JSutter
This is all off memory......
You need 2 relays, 1 momentary switch, 12 gauge wire, 18 gauge wire, and some crimp on terminals. Get the wiring diagram for your car, find the 2 starter wires, connect each to relay pin 87 using separate relays (use the 12 gauge wire). Connect 12v+ to pin 30 on each relay (again with 12 gauge wire). Connect the ignition (hot with key on) wire to pin 85 on each relay (18 gauge wire here. Then run a wire from pin 86 to the switch then to ground(18 gauge again).
|
sounds like a pretty good memory!