Quote:
|
Originally Posted by KidHauler
I really like the Winter GAB setup that Irish44j runs. (saw it on his home page on the bottom half of page 3). I searched but can't find a How-to for it and, as a newbie, I can't PM him. OSCAI links in the how to section are dead. So, I have two questions:
1. Is there a how-to for this type of GAB?
2. How much would you expect to pay for an intake air filter holder from a junk yard / new?
Thanks in advance...
|
If you're referring to this one pictured below, all you have to do is get a boring drill bit that is slightly narrower than the little slots on the filter holder top and drill the holes. I got little plastic plugs from the hardware aisle in home depot, in the little drawers near the screws/nails. Get the plugs (they are white plastic) and find a bit that is the same size, and then drill away! Or, to do the conventional GAB, all you need to do is cut off the front edge of the holder (the part where I drilled holes instead).
You could probably get the holder from a junkyard for a few bucks if you can find one.