Auto a/c heater control problems & questions

Shoveller · 10-17-2009, 10:33 PM

I searched!

93 ACC not working. None of the lights (including display) light up, certain modes/fan speeds/temperature combos don't work. Not that I can see what everything is set on anyway.

Can I swap it for a manual until I can find another auto? There are several manual units at the junkyard. Will other years/gens work? There were more 4th gens.

Hectic · 10-18-2009, 01:26 AM

Just buy a new control unit and see where you're at. Converting to from auto to manual is a lot of work. I have a couple spare auto units, I could probably let one go, send me a PM if you're interested.

Infam0usMax · 10-18-2009, 11:21 AM

do u have a digital climate control that doesnt work? if so i can tell u how to turn the heat on if ur heat works

*bvtran* · 10-18-2009, 01:00 PM

those digital controllers are notorious for LED problem. I replaced all the capacitors and resistors in mine and the pos quit working after two months. It's been dead ever since. I recently picked up a replacement from jy and right off the bat, the LED won't light up but it works though. crap. what a piece of junk.

Infam0usMax · 10-18-2009, 04:52 PM

Quote:

Originally Posted by bvtran

those digital controllers are notorious for LED problem. I replaced all the capacitors and resistors in mine and the pos quit working after two months. It's been dead ever since. I recently picked up a replacement from jy and right off the bat, the LED won't light up but it works though. crap. what a piece of junk.

i highy agree... my screen doesnt show but it does work lol and u can see the green light on like two bottons...im not gonna try to replace it

Shoveller · 10-19-2009, 12:11 PM

So whats involved in switiching it to manual?

Hectic · 10-19-2009, 08:18 PM

Swap control units, swap motors, extensive wiring. They are 2 completely different systems.