How to turn off ABS light ?
11-09-2005, 07:52 PM
#1
How to turn off ABS light ?
I was having tooooooo much fun with the maxima and I have developed the ABS light to stay on. I have tried resetting the ECU but its still there.
Any ideas? Please help me quickly. (its not my car, but they dont know yet. lol)
Thanks
Any ideas? Please help me quickly. (its not my car, but they dont know yet. lol)
Thanks
11-09-2005, 07:56 PM
#3
The ABS computer is seperate from the ECU 
Screwing around in someone elses car = 
The info you need is all here on the forums, you just have to search 
BTW, this has been posted at least 3-4 times in the last 2 weeks alone.
Screwing around in someone elses car = The info you need is all here on the forums, you just have to search BTW, this has been posted at least 3-4 times in the last 2 weeks alone.
11-09-2005, 08:04 PM
#4
I just did the poor mans search and found that I have a high chance of being 
. Ohh man , Im so screwed. But is ther any other alternative other than replacing the abs sensor, or cleaning it ? Like a quick fix or check or something that just might work ?
. Ohh man , Im so screwed. But is ther any other alternative other than replacing the abs sensor, or cleaning it ? Like a quick fix or check or something that just might work ?
11-10-2005, 01:44 PM
#10
heres the link I used for reference
http://forums.maxima.org/showpost.ph...53&postcount=1
http://forums.maxima.org/showpost.ph...53&postcount=1
11-10-2005, 02:34 PM
#13
Drive the Max above 20 MPH for a few minutes, stop and turn off the engine.
Ground the 'L' terminal on the Consult connector , behind the fuse panel cover to the lower right of the steering column.
Turn the ignition to on, and it'll start flashing the ABS trouble code.
It'll flash once, pause, and twice again (code 12) to indicate it's starting code playback.
Then interpret the codes just as when pulling a CEL, except there are no long/short flashes, they're all the same length.
Post the code you get back up here, too many to type out.
Ground the 'L' terminal on the Consult connector , behind the fuse panel cover to the lower right of the steering column.
Turn the ignition to on, and it'll start flashing the ABS trouble code.
It'll flash once, pause, and twice again (code 12) to indicate it's starting code playback.
Then interpret the codes just as when pulling a CEL, except there are no long/short flashes, they're all the same length.
Post the code you get back up here, too many to type out.
Thread
Thread Starter
Forum
Replies
Last Post
tsi6001
5th Generation Maxima (2000-2003)
12
10-03-2022 10:23 PM
VerzOphion
1st-3rd Generations Classifieds (1981-1994)
0
08-28-2015 07:57 PM
kirkhilles
5th Generation Maxima (2000-2003)
2
08-08-2015 10:53 AM
