Quote:
|
Originally Posted by i30dvr
I have a question. I have a 99 I30 and i want to do this mod but if i get this done by you will the headlight assembly plug into the stock wire harness or do i need to change it. Also you might have already said this but what is the turn around time? Very interested, Thanks
|
Turn around time is about a week and a half excluding shipping time. I do basic aiming to make sure the projector is aligned and that the cut off is level and that takes a little time. I don't do anything to where you would need to change a socket, you basically splice the wires in, that's what I did on mine, or you can get a used headlight bulb and modify it as the plug in from the hid wiring harness. Which won't be a problem if you send me a bulb you don't need. It's waaay cleaner that way.
As far as the flipping on of high beams, I simply put a diode going from the highbeam wire and connected it to the low beam wire that way both wires stay powered and I haven't had any problems, if it does flicker, my eye is not fast enough to catch it.