Maxima Forums - View Single Post

Compton · 06-22-2004, 09:46 AM

Hi,

I replaced my spark plugs, ignition coils, radiator fan motor and thermostat last weekend. When I started the car back up, the SES light was on. The codes thrown were

P0110 IAT Mal
P0105 Map Cir Mal

The IAT=Intake Air Temperature but not sure what that means. I had the codes cleared by a mechanic and they haven't come back yet. Can anyone explain what the codes mean? And is this just due to replacing too much stuff at once and it temporarily trippped a code but doesnt indicate a long term problem?

Any advice is appreciated.

06-22-2004, 09:46 AM	#1
Compton Senior Member Join Date: Nov 2000 iTrader: (0) Posts: 158	Code help needed: P0110 and P0105 Hi, I replaced my spark plugs, ignition coils, radiator fan motor and thermostat last weekend. When I started the car back up, the SES light was on. The codes thrown were P0110 IAT Mal P0105 Map Cir Mal The IAT=Intake Air Temperature but not sure what that means. I had the codes cleared by a mechanic and they haven't come back yet. Can anyone explain what the codes mean? And is this just due to replacing too much stuff at once and it temporarily trippped a code but doesnt indicate a long term problem? Any advice is appreciated.