|
The 9007 harness kit is supplementing the existing wiring so you are not replacing anything. Just plug the relays that came with the kit into the wiring harness. Connect the 2 ground wires (black) to the same ground points that are used by the 9004 wiring. Then connect the 2 power wires (red) to your positive battery terminal. Remember to disconnect the negative battery terminal first then disconnect the positive battery terminal. Reverse to reassemble. Remember to swap the ground and low beam wires on the socket end that you will connect to the 9004 driver side socket. Finally, insert the new 9007 bulbs into the sockets and test out your lights. This is a very simple mod so read through Maxima10to1's tutorial if you still have questions.
|