Maxima Forums - View Single Post - 9004 lights to 9007 conversion write up and pics

*JSutter* · 05-22-2004, 12:36 PM

Here are some close ups of the two light bulb bases I modified:

Hot melt glue is my friend.

Beam patter comparison:

On the left a 9007 Sylvania Xtravison with the 12 gauge headlight harness.
On the right a 9004 Wagner Truview with stock headlight harness.

EDIT: 1/30/05
Where to plug in a ready made 9007 harness:

Just remember to swap the stock low beam and ground wires when using this.

EDIT: 7/23/05
This is how I made my harness

No modification to the stock wires is needed. I did not use the diode, so at this time I dont recommend it. I may try it though I dont want to over heat anything. I just included it if any one wants even more light.

05-22-2004, 12:36 PM	#3
JSutter I'm nutty for Nissans 1998 SE Join Date: Feb 2003 Location: Portland, Maine iTrader: (40) Posts: 7,728	Here are some close ups of the two light bulb bases I modified: Hot melt glue is my friend. Beam patter comparison: On the left a 9007 Sylvania Xtravison with the 12 gauge headlight harness. On the right a 9004 Wagner Truview with stock headlight harness. EDIT: 1/30/05 Where to plug in a ready made 9007 harness: Just remember to swap the stock low beam and ground wires when using this. EDIT: 7/23/05 This is how I made my harness No modification to the stock wires is needed. I did not use the diode, so at this time I dont recommend it. I may try it though I dont want to over heat anything. I just included it if any one wants even more light.