1st-3rd Generations Classifieds (1981-1994)No superchargers in here, but you will find other useful parts and accessories.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
For starters, I have owned many Nissans/Infinitis over the years and have worked on all of them myself. So, I have accumulated quite a number of spare parts that were never used for one reason or another. All of the cars these were intended for have sold or crashed so they have no use to me. I'm moving soon and would love to get rid of them. My loss is your gain. Local pick-up is preferred but I will ship for a fee with verified pay-pal payment.
- Front oil seal - crank, Nissan part # 13510-97E10 92-94 Maxima VE + others? (New) $5.00
- Rear main seal - crankshaft, Nissan part # 12279-AD205 89-94 Maxima, 300ZX, S13 SR20DET, CA18DET, Pathfinder, Xterra, Frontier + others (New) $10.00
- Valve cover gasket - left, Nissan part # 13270-97E05 92-94 Maxima VE only (New) $5.00
- Lock assembly - front door (driver side), Infiniti part # 80503-C9910 96-99 I30, others? (New) $75.00
- Power lock -actuator front (passenger side) Nissan part # ??? 89-94 Maxima (Used) $25.00
- Relay - 1M1B *grey* Nissan part # 25230-C9962 89-94 Maxima + others (New) $10.00
- Maxima speedometer (dash) cluster with white face gauges showing 131,632 mi. $35.00
- Mud Flaps (factory) – 3rd gen max, good condition, not pictured $20.00
- Nissan oil filter – Nissan part # 15208-60U00 original before part # discontinued & superceded $15.00
- Amsoil synthetic manual transmission & transaxle gear lube SAE 75w-90 API GL-4 2 quarts $5.00 ea.
- Momo stealth assassin wide pedal kit in black & silver, professional kit that requires bolt on installation (BMW, Mercedes, Nissan, etc.) *New* $50.00
- Hayame pro-series carbon fiber (real) pedals with dead pedal (Slightly Used) $10.00
Call Matt @ (321) 591-6303 with any questions. Thanks for looking.
BTW, Threw in a pic of the new whip just for kicks. At least its still in the Nissan family.
For starters, I have owned many Nissans/Infinitis over the years and have worked on all of them myself. So, I have accumulated quite a number of spare parts that were never used for one reason or another. All of the cars these were intended for have sold or crashed so they have no use to me. I'm moving soon and would love to get rid of them. My loss is your gain. Local pick-up is preferred but I will ship for a fee with verified pay-pal payment.
This is off-topic but dude I thought you fell off the face of the earth I dug up some of your old VE auto -> 5 speed threads a couple months back when doing my swap on my project car recently
__________________
Desperately looking for a 5 speed axle carrier bracket. Either VG or VE will work. PM me if you have one!
Good working door lock timers $20 shipped. PM me if interested
I'm all over the Hayame pedals. I'll be happy to pay shipping to 30728 if you'll send a quote.
__________________ Aztec Red 92 SE 5spd - 'JDM' VE swap/ASP UDP/NWP Phenolic Spacers/8 awg engine grounds/WarpSpeed Y & B/CAI/SuspensionTech 1.5" drop/KYB GR-2's/Exedy clutch kit/FSTB/BlehmCo RSTB & Stage 1 LTB/GXE power seats/4th Gen SE wheels on Kuhmo Ecsta 225/50R16’s
This is off-topic but dude I thought you fell off the face of the earth I dug up some of your old VE auto -> 5 speed threads a couple months back when doing my swap on my project car recently
Wow, those old posts are still floating around. So how did the swap go? Did you get the cruise control and reverse lights working? I remember figuring out the cruise control wiring was fun to say the least. Can you say supermultiplejunction 3 times fast?
...But yeah, I fell off the maxima.org face of the earth when I smashed my max and sold it to Pearl93VE. He got all sorts of goddies out of that deal.
I have a J30 that keeps me busy now and have found myself seriously contemplating a 6spd swap. But my ride never was offered in a manual so I'm looking at uncharted territory. I think I'll just have to be content in my memories of what was.
Shipping out from 32814. USPS priority mail is $5 to you. You have dibbs. .....
Priority mail to you is $5 as well. They use a standard rate even though you're closer. Looked it up here as 2lbs...
Are the Hayame pedals still available or did you sell them?
__________________ Aztec Red 92 SE 5spd - 'JDM' VE swap/ASP UDP/NWP Phenolic Spacers/8 awg engine grounds/WarpSpeed Y & B/CAI/SuspensionTech 1.5" drop/KYB GR-2's/Exedy clutch kit/FSTB/BlehmCo RSTB & Stage 1 LTB/GXE power seats/4th Gen SE wheels on Kuhmo Ecsta 225/50R16’s
Are the mudflaps black? Do you have a picture of them? Can you do $30 shipped for the mudflaps and the two quarts of Amsoil GL4? My shipping address is in VA, 22911, it a commercial address with a loading dock if it matters.
Your engine was swapped into my neighbors '94 Auto Max, he got it in there within a few days and it started up right away... purring smooth at 800rpms- no VTC clack.
Pretty much no part of the car was wasted and several parts of it are cruising around on my car to this day- including a lot of body parts.
Are the mudflaps black? Do you have a picture of them? Can you do $30 shipped for the mudflaps and the two quarts of Amsoil GL4? My shipping address is in VA, 22911, it a commercial address with a loading dock if it matters.
Here is the picture of the flaps and something else I found. The 3rd gen factory sunroof wind deflector. Both are in good shape with a few minor scuffs. The wind deflector is $10 + shipping.
I can send it all out to you for $35. Shipping is about $10 but I'll knock off half.
Your engine was swapped into my neighbors '94 Auto Max, he got it in there within a few days and it started up right away... purring smooth at 800rpms- no VTC clack.
Pretty much no part of the car was wasted and several parts of it are cruising around on my car to this day- including a lot of body parts.
Good to see you back!
Cool man. I'm glad to see it all went to good use. That motor was babied most of the time and always had oil changed on time with synthetic. It should last many more years.
So, did you ever get around to the swap? And what about that body kit or the fog lights? If you still have the lights I could probably find a use for em.
Here is the picture of the flaps and something else I found. The 3rd gen factory sunroof wind deflector. Both are in good shape with a few minor scuffs.
I can send it all out to you for $35. Shipping is about $10 but I'll knock off half.
I ended up selling the body kit to someone on here, but I believe the fogs are still sitting over at my dad's house, so provided he didn't do anything with them they're yours. Due to some unfortunate and life changing circumstances I wasn't able to do, or even think about the swap, I still have all the parts and tranny sitting in the garage as well as a new clutch and fidanza ready to go in. But provided my auto is going out rather quickly now, it won't be long.
I ended up selling the body kit to someone on here, but I believe the fogs are still sitting over at my dad's house, so provided he didn't do anything with them they're yours. Due to some unfortunate and life changing circumstances I wasn't able to do, or even think about the swap, I still have all the parts and tranny sitting in the garage as well as a new clutch and fidanza ready to go in. But provided my auto is going out rather quickly now, it won't be long.
Sorry to hear of the bad luck. I hope everything is sorted out now.
As far as the swap I can understand 2nd thoughts. I only did it cause my auto trans went kaput. If I didn't have that motivating me It would still be shifting itself around town somewhere.
Now, if you still have those fogs I'd love to use 'em. Yes they need a little tlc but I'll fix them up. Please look for the brackets and all the parts you can find. I'll pay pal (or mail) you shipping and a few bucks.
Did some more diggin' and found some other stuff. I also have a reverse indiglo needle kit and R33 Skyline tail lights.
The needle kit had 2 pairs of polarg hyper white 194 bulbs but I found a use for 'em. So I'm selling just the kit. You could order some of those bulbs or just use silver star sylvania's. The kit is sold by www.importintelligence.com and retails for $69.90. The color is sonic blue and it consists of 4 L.E.D.s connected to copper wires (pictured below), a dimmer switch, and instructions. I'll sell it shipped for $30.
The skyline tails are in good shape. They have one small knick on the corner you can't even see in the picture. Here's some pics of what they look like on a 3rd gen http://www.cardomain.com/ride/220297/5 I'll let them go for $40 plus shipping.
Interested in the tails, but can't find a thread on what it would take to mod my 3rd to take them. How big of a project is it?
Thanks
I remember looking into it when I repainted my car. They are not a bolt on as they are bigger than stock. They would require some cutting of the lights, trunk lid, or both. Then you could weld or bondo the rest. Its not going to be easy but it would look nice. You could have a custom hot rod shop or competent body shop do the work as well.
I dug up some of your old VE auto -> 5 speed threads a couple months back when doing my swap on my project car recently 
Linear Mode
