digital fuel sending unit

*Big_E-Dog* · 08-18-2008, 03:37 PM

i need one of these for an 87 maxima. but i bet theyre all the same(2nd gen wise) anyone got one to send my way. doing the digital swap and need this part. they steal all the tanks from the yards so ppl wont take the gas do no feul components here.

thanks.

Niku-Sama · 08-20-2008, 12:39 PM

i'm going to the yard today to get a rear bumper for my 280, i'll check and see if i can find any thing.

you think one from a 3rd gen might work?

vernk · 08-20-2008, 02:34 PM

is the sending unit different or just the computer for it? is the speed sensor sending unit a cable that goes to the cluster or is it like my 84 200sx and have a short cable that goes to a electric sensor then to the cluster or like a 3rd gen?

*Big_E-Dog* · 08-20-2008, 02:36 PM

i have no clue but if ya find one from a 2nd gen geab it ill get y aback for it. i dont know if the one i have is working. its from the analog dash and it reads past half full and it dropped a bar yesterday.

so it might be working or it might not just see when i run outa gas......

Niku-Sama · 08-20-2008, 05:18 PM

you know the float in your tank might just be gummed up, i had to get in and scrub mine a bit one time and it was fine.

either way no luck with any thing, some one pillaged the fuel parts out of the 3rd gen and the seccond gens....well i dont know why they were even there. but i got the parts i need.

*Big_E-Dog* · 09-12-2008, 06:55 AM

naaah it aint gummed up. i went from analog to digital and the fuel pump sending units are different, they send out lower signals than the analog ones.