1/4 and 1/8 Mile RacingTalk about track times, launch techniques, strategies, etc. Check out the "Timeslips" subforum for posted times.No discussion of street racing will be tolerated.
Welcome to Maxima.org!
Welcome to Maxima.org,
You are currently viewing our forum as a guest, which gives you limited access
to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join Maxima.org today!
Hi Guys: One more time @ the track, still traction problems, but this time I lowered the Tire's pressure to 16psi, 15 psi and 13 psi, @ 13 psi I started losing Top end speed, the best was on 15 psi. My son did three runs in his Turbo Civic, best run 60ft 2.105, ET12.149, MPH 123.50.
you might have a tough time getting in to the 12s with 107mph traps. it can be done, but you'll have to cut a pretty strong 60'. might take some practice.
__________________ 95 SE - Stock 3.0L w/ USIM - T61/P-trim @ 14.5psi - 93 octane
11.76 @ 121 - 1.82 60' - ET Street DOTs
12.15 @ 123 - 1.95 60' - Nitto DR 3.5L swap with I/Y/E
12.92 @ 104 - 1.69 60' - M&H Slicks
13.60 @ 103 - 2.15 60' - Street tires
you might have a tough time getting in to the 12s with 107mph traps. it can be done, but you'll have to cut a pretty strong 60'. might take some practice.
Hi Neal : Today I bought MTs 24.5/8/15, and planning to go to the track next week (Weather permit), and will see what ETs I will get.
__________________ Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback, Emanage blue, B&M Short Shifter,Third PAR Synchromesh Racing Gear, Vortech Maxflow Race Bypass valve, Stillen Sport Drilled Rotors, w/ Hawk HPS Brake Pads,Eibach Pro-Kit on Tokico Illumina,Cattman FSTB,& RSB, Competition pressure plate on-ACT 6 Puck sprung disk.
I still dont understand 380+whp and 107traps. Even with traction issues thats really low.
shifting was a little slow and its a supercharger so think lots less tq, but still he makes 140+whp and 75+wtq over me and only traps like 5mph faster. something seems off.
Whats the DA when you race? Whats the actual track altitude?
shifting was a little slow and its a supercharger so think lots less tq, but still he makes 140+whp and 75+wtq over me and only traps like 5mph faster. something seems off.
Whats the DA when you race? Whats the actual track altitude?
385 whp, 319.4 Tq. on DynaPack Chassis Dynamometer = approx 330whp,281 tq on Mustang Dyno, or Dyno Jet. Dynapack reads 12% higher than Mustang or Dyno Jet. About the shifting is littel slow because I do not want to break the Trans.
__________________ Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback, Emanage blue, B&M Short Shifter,Third PAR Synchromesh Racing Gear, Vortech Maxflow Race Bypass valve, Stillen Sport Drilled Rotors, w/ Hawk HPS Brake Pads,Eibach Pro-Kit on Tokico Illumina,Cattman FSTB,& RSB, Competition pressure plate on-ACT 6 Puck sprung disk.
Yeah the shifting is understandable, especially with a 5-speed they're pretty fragile. It's not like it's that slow anyway though. Not hurting your traps much
Hi Neal : Today I bought MTs 24.5/8/15, and planning to go to the track next week (Weather permit), and will see what ETs I will get.
Hi Neal: I went to the track did two runs w/ the slick on, tire preasure 13psi, and then switched to the DRs, cause the shop did not balance the slick, the thing is I sow the worker getting it on the balance mechine, but it looks like he forgot to add the weight, any way I pulled 1.98 60', 13.29 sec, 105.76MPH. I'm planning to retune, last time was tuned in Mar. 08.
__________________ Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback, Emanage blue, B&M Short Shifter,Third PAR Synchromesh Racing Gear, Vortech Maxflow Race Bypass valve, Stillen Sport Drilled Rotors, w/ Hawk HPS Brake Pads,Eibach Pro-Kit on Tokico Illumina,Cattman FSTB,& RSB, Competition pressure plate on-ACT 6 Puck sprung disk.
Getting better. I cut a 1.7 60 on the same size tires with 300whp.
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
a few 12.9's 12.8's 12.6 and my 12.5 run. I trapped 106 on the 12.9 run.
__________________
97 SE Auto Built Auto
97 SE Holset HX52|N2O|6 SP|Built 3.56|More to come
91 GXE Auto bone stock beater
91 GXE 5sp Another beater
Led retro's Pm me
1.9s is what I was cutting my first time on slicks as well, you'll improve. It takes some getting used to how to launch them, and also getting the nerve up to really tach it up and then just let it go. My first day at the track I started at 3000, then tried 3500, then 4000, etc. If you're not used to running on slicks then it can be a little worrisome.
__________________ 95 SE - Stock 3.0L w/ USIM - T61/P-trim @ 14.5psi - 93 octane
11.76 @ 121 - 1.82 60' - ET Street DOTs
12.15 @ 123 - 1.95 60' - Nitto DR 3.5L swap with I/Y/E
12.92 @ 104 - 1.69 60' - M&H Slicks
13.60 @ 103 - 2.15 60' - Street tires
1.9s is what I was cutting my first time on slicks as well, you'll improve. It takes some getting used to how to launch them, and also getting the nerve up to really tach it up and then just let it go. My first day at the track I started at 3000, then tried 3500, then 4000, etc. If you're not used to running on slicks then it can be a little worrisome.
Yep your wright, I will do my best, and will update you.
__________________ Vortech V2 T-trim, 2.87" pulley, intercooled, Defi Gauges, RC 550cc, Walbro 255lph, Aeromotive AFPR, Cattman Headers and 3"catback, Emanage blue, B&M Short Shifter,Third PAR Synchromesh Racing Gear, Vortech Maxflow Race Bypass valve, Stillen Sport Drilled Rotors, w/ Hawk HPS Brake Pads,Eibach Pro-Kit on Tokico Illumina,Cattman FSTB,& RSB, Competition pressure plate on-ACT 6 Puck sprung disk.